![]() If using a wired connection, connect the client machine to the AP either through a PoE switch or a PoE Injector.Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID broadcast by the AP) or over a wired connection.The following procedure describes how to set the static IP: Static IPs are assigned using the local web server on each AP.It can also be powered by an AC power adaptor MA-PWR-50WAC Meraki AC Adapter for MR Series MR57 can also be powered by a single 802.3bt capable PoE injector MA-INJ-6 - Meraki multiGigabit 802.3bt Power over Ethernet Injector. MR57 APs can be powered by the PoE power in different modes as mentioned above when using a PoE-capable switch. ![]() The table below indicates the different modes of PoE power input and the expected operation of the AP The AP will not power up when powered by a single 802.3af power source. All the AP radios will run at full capacity, however, the USB port will be disabled when powered by a single 802.3 at power. The AP is capable of operating at its full capacity when powered by a single 802.3bt power at full capacity. The two Ethernet ports are capable of combining the power of two 802.3 af/at power to provide 802.3 at/bt. ![]() MR57 can be powered by dual M-Gig 802.3 bt capable PoE ports.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |